KUNOS

No reviews yet
$29.95
Recommended for Interior furniture and woodwork

Not sure this is the right product? Check Product details below or use the project calculator before ordering.

Size
Colour 002 Clear

Screen colours are approximate. Order a sample to test on your own wood.

Quantity

Availability: This product is currently available upon request. For information or to place an order, contact orders@livos.ca or commandes@livos.ca.

Maintenance oil for previously oiled interior wood

KUNOS 1862 is an interior maintenance oil designed to restore lustre to previously oiled wood that has become dull through regular wear. It can be applied with a cloth or polishing tool and does not require sanding for routine maintenance.

Restores lustreRefreshes dull, previously oiled wood surfaces.
No sandingRoutine maintenance can be done without sanding the whole surface.
Easy applicationApply with a cloth or suitable polishing tool.

Product details

Best for Previously oiled interior wood surfaces
Purpose Maintenance and appearance refresh
Colour Clear
Application Cloth or polishing tool
Sanding Not required for routine maintenance

Good to know: KUNOS 1862 is a maintenance product for already-oiled wood, not a substitute for the initial finishing system on raw wood.

Common questions

Can KUNOS 1862 be used on raw wood?

It is intended primarily for maintenance of surfaces that are already oiled.

Do I need to sand before using it?

For routine maintenance, the existing product guidance says sanding is not required.

How is KUNOS 1862 applied?

It can be applied with a cloth or a suitable polishing tool.

When should I use a maintenance oil?

Use it when a previously oiled surface begins to look dull or dry from regular wear.

Reference: 1862

Colours, seals and protects in one product. The oil soaks into the fibre instead of covering it, so the wood keeps its texture and stays repairable.

Floors, stairs, furniture, panelling and countertops, including kitchens and bathrooms.

Sand to 120 grit and vacuum. Roll on a thin first coat, wipe off anything not absorbed after 30 minutes, leave 12 hours, then apply the second coat.

Linseed oil, wood oil, natural resins and plant based drying agents. No biocides, no film formers, no petrochemical binders.

What customers say

How much do I need?

Coverage is about 14 m2 per litre per coat.

You will need about