Best sellerSample KOIMOS
Not sure this is the right product? Check Product details below or use the project calculator before ordering.
Test KOIMOS colour on your wood before ordering
This 50 mL KOIMOS sample is made for colour testing. Try your selected shade directly on the project wood to see how the one-coat oil interacts with the grain, sanding and natural colour of the species.
Product details
| Sample size | 50 mL |
| Product | KOIMOS 208 |
| Colours | 10 sample colours available |
| Best for testing | Interior floors, stairs and furniture |
Good to know: For the most accurate comparison, sand every test area the same way and view the dried samples in the room where the finished wood will be installed.
Common questions
Why can the same colour look different on two woods?
Natural wood colour, grain, porosity and sanding all influence the final appearance of a penetrating oil.
Can I compare several KOIMOS colours side by side?
Yes. Testing multiple samples on the same wood is the best way to compare tones.
Is the 50 mL sample intended for finishing a project?
No. It is intended for colour and finish evaluation before purchasing a larger size.
Colours, seals and protects in one product. The oil soaks into the fibre instead of covering it, so the wood keeps its texture and stays repairable.
Floors, stairs, furniture, panelling and countertops, including kitchens and bathrooms.
Sand to 120 grit and vacuum. Roll on a thin first coat, wipe off anything not absorbed after 30 minutes, leave 12 hours, then apply the second coat.
Linseed oil, wood oil, natural resins and plant based drying agents. No biocides, no film formers, no petrochemical binders.
